luglugalugaaen |

seabsea

sea nav gua

Language: en spa ru fra it
sea

form

GET YOUR FREE QUOTE

We will contact you within 24 hours.

Discover Our Premium Stainless Steel Flanges Metering Station

Time: 22-July 2024 | Source: I-FLOW| Share

We're thrilled to unveil our premium range of stainless steel wafer flange metering station,meticulously engineered to meet the highest industry standards. Whether you're in the petrochemical, or maritime sector, our flanges offer unmatched durability and performance.

Details:

◆ Design according to BS7350

◆ Below the valve stem is the valve closing direction 

◆ Before installing the valve, ensure that the pipeline is clean and free of oxide scale, metal plates and other debris left during welding. 

◆ The pipes must be concentric when connected to the valve body and not subject to vibration. The direction of water flow should be the same as that marked on the valve body. 

◆Below 0°C only for water with added antifreezing fluids over 100°C only for water with added anti-boiling fluids

◆ When maintaining the valve, the power must be cut off or isolated. The water system should not be under pressure.

◆ When the driver is installed vertically on the valve body, avoid installing the driver under the valve, and leave enough space for routine maintenance(such as removing the driver). 

Back To The List btn

Related News

Where PRVs Are Deployed
29-July 2025

Where-PRVs-Are-Deployed

In the realm of industrial operations, where high pressure is a constant presence, the Pressure Relief Valve (PRV) stands as a non-negotiable safety barrier. Unlike generic safety tools, PRVs are engineered to respond with precision to pressure fluctuations, making them indispensable for protecting equipment, workers, and entire facilities from catastrophic failures. Let’s dive into how these valves function, where they’re deployed, and why their upkeep is vital to operational integrity.​

View Details
How Do I Adjust Pressure Reducing Valve
29-July 2025

How Do I Adjust Pressure Reducing Valve

Adjusting a pressure reducing valve (PRV) is a relatively straightforward process, but it must be done carefully to avoid damaging your system or setting the pressure too high or too low. Here's a step-by-step guide on how to adjust a PRV, whether it's for water, steam, air, or another fluid:

View Details
Which One Should You Choose,Brass or Stainless Steel Valves
29-July 2025

Which One Should You Choose,Brass or Stainless Steel Valves

When selecting gate valves, material compatibility with the operating environment is crucial. Brass and stainless steel are two commonly used materials, each with distinct strengths.

View Details
What Can Go Wrong When Check Valve Fails
25-July 2025

What Can Go Wrong When Check Valve Fails

Most of us don’t think twice about check valves—until something goes wrong. These small devices quietly keep your system flowing in the right direction. But when a check valve fails, the effects can ripple through your entire setup.So, what actually happens?

View Details
How To Choosing The Right Valve
24-July 2025

How To Choosing The Right Valve

In the world of industrial flow control, not all valves are created equal—and choosing the wrong one can lead to system inefficiencies, breakdowns, or worse. Whether you’re an engineer, contractor, or purchasing manager, knowing what to prioritize when selecting a valve can save you headaches down the road.

View Details
How To Replace Shut Off Valve
22-July 2025

How To Replace Shut Off Valve

It always happens at the worst time. A leaky toilet tank, a dripping faucet, or worse—an unexpected flood. You reach for the shut-off valve under the sink... and it doesn’t budge. Or worse, it breaks off in your hand.That’s when you realize: a small valve has big responsibilities. Replacing a shut-off valve may sound like a plumber’s job, but with a little preparation and a few tools, it’s a DIY-friendly task that can give you long-term peace of mind.

View Details